Industry News

Intel confident in mass production of Intel 4, agency says its performance is comparable to TSMC's 3nm

Views : 104
Update time : 2023-08-25 12:03:46
        According to thelec, Intel expressed confidence in the mass production of Intel 4 (7nm class), which is the first application of extreme ultraviolet (EUV) light in Intel's process. IC Knowledge, an organization specializing in reverse engineering, analyzed that the performance of Intel 4 process products is better than TSMC's 5nm process and similar to the existing 3nm process.
        In a group interview held in Penang, Malaysia, on Aug. 22, William Grimm, director (vice president) of product engineering for Intel Logic Technology and Development, said, "With EUV, we can control process complexity." 
 
 
        Intel 4 is the first application of EUV in Intel's process, and the Meteor Lake CPU Tile, which is scheduled for release this September, is a product that will be produced through Intel 4. The industry expects issues such as yield due to the later rollout of EUV compared to competitors.
        Regarding performance comparisons with competing foundries, William Grimm said, "We referenced external benchmarks for our own PPA (performance, power, area) design," adding, "It's difficult to compare Intel 4 to existing nodes from other foundries. "
        According to reverse engineering firm IC Knowledge, the Intel 4 process performs similarly to Samsung Electronics 3nm and TSMC 3nm. This means that transistor integration is higher than other companies' 3nm processes. Intel has previously criticized that the process name is not the same as the actual transistor length of the semiconductor. 
        William Grimm described this Intel 4 node as a process with a particular focus on power efficiency. He explained, "If the Intel 7 process is a process focused on maximizing performance, this Intel 4 is focused on improving power efficiency, and it's suitable for applications such as laptops." 
        Finally, William Grimm said, "[EUV capacity] is sufficiently secured to meet market demand" and that "plans for the next few years, such as Intel 3, are already set." Intel 3 will use a 4nm process and is scheduled for release in the second half of this year.
Related News
Read More >>
LDK220 LDO Voltage Regulators Specifications, Features, Pinout, and Applications LDK220 LDO Voltage Regulators Specifications, Features, Pinout, and Applications
Feb .02.2026
The LDK220 series of low-dropout linear regulators (LDOs) is a high-performance device designed specifically for low-power consumption and high-precision voltage regulation, widely used in scenarios such as consumer electronics, industrial control, and po
Xilinx Spartan®-7 FPGA Family: A High-Performance and Energy-Efficient Solution for Mid-Range FPGAs Xilinx Spartan®-7 FPGA Family: A High-Performance and Energy-Efficient Solution for Mid-Range FPGAs
Jan .20.2026
Xilinx Spartan®-7 FPGA Family stands as a defining solution in the mid-range FPGA landscape, blending high performance, energy efficiency, and cost-effectiveness to redefine versatility for industrial, IoT, and consumer electronics applications. Built on
Altera FLEX Series: Architecture, Innovation, and Application Across Four Generations Altera FLEX Series: Architecture, Innovation, and Application Across Four Generations
Jan .07.2026
The Altera FLEX series was more than a lineup of FPGAs—it was a blueprint for how programmable logic devices could evolve to meet diverse market needs. The FLEX 8000 laid the architectural groundwork, the FLEX 10K redefined functionality with embedded mem
LM4765 vs. LM4766: A Comprehensive Comparison of Dual-Channel Audio Power Amplifiers LM4765 vs. LM4766: A Comprehensive Comparison of Dual-Channel Audio Power Amplifiers
Dec .16.2025
Among TI standout offerings, the LM4765 and LM4766 are dual-channel amplifiers designed to cater to diverse audio needs—from compact setups to high-fidelity systems. While sharing the same product lineage, these chips differ significantly in power output,