Vishay Introduces Thick Film Power Resistor with Optional NTC Thermistor and PC-TIM to Simplify Design, Save Board Space and Reduce Costs
Views : 128
Update time : 2023-06-03 10:55:00
Vishay Intertechnology, Inc. announced the release of the ISOA, a new AEC-Q200 certified thick film power resistor in a small SOT-227 package that can be mounted directly on a heat sink. 120 W, optional NTC thermistors for internal temperature monitoring and pre-coated phase change thermal interface material (PC-TIM) for improved placement efficiency.
ISOA has the option to integrate an AEC-Q200 certified, temperature cycled NTC thermistor into the resistor package, simplifying design and saving board space, with the option of PC-TIM for increased production process placement efficiency.
The high power and energy dissipation of the device simplifies design and reduces the number of power devices required, resulting in lower costs. The resistors have a high energy pulse handling capability (up to 110 J / 0.1 s) and have passed 3,000 230 J / 670 ms and 5,000 350 J / 1060 ms multi-pulse cycles, making them suitable for a wide range of applications with high energy and repetitive surge pulses. In addition, the devices are available with customer-specific tests.
The ISOA resistors have a resistance range of 0.47 Ω to 1 MΩ, tolerances of ± 5 % and ± 10 % and TCRs of ± 100 ppm/K, ± 150 ppm/K and ± 300 ppm/K. The resistors have a maximum operating voltage of 1500 V, an operating temperature range of -55 °C to +150 °C and a dielectric strength of 4000 Vrms. The devices are RoHS compliant and have a non-inductive design and can include two different resistors. The new resistors are available in sample and mass production with a lead time of 15 weeks.
The LDK220 series of low-dropout linear regulators (LDOs) is a high-performance device designed specifically for low-power consumption and high-precision voltage regulation, widely used in scenarios such as consumer electronics, industrial control, and po
Xilinx Spartan®-7 FPGA Family stands as a defining solution in the mid-range FPGA landscape, blending high performance, energy efficiency, and cost-effectiveness to redefine versatility for industrial, IoT, and consumer electronics applications. Built on
The Altera FLEX series was more than a lineup of FPGAs—it was a blueprint for how programmable logic devices could evolve to meet diverse market needs. The FLEX 8000 laid the architectural groundwork, the FLEX 10K redefined functionality with embedded mem
Among TI standout offerings, the LM4765 and LM4766 are dual-channel amplifiers designed to cater to diverse audio needs—from compact setups to high-fidelity systems. While sharing the same product lineage, these chips differ significantly in power output,
