Vishay launched the industry's advanced standard rectifier and TVS two-in-one solution
Views : 127
Update time : 2023-08-19 11:59:33
Recently, Vishay Intertechnology, Inc. (NYSE stock code: VSH) announced the introduction of the industry's advanced standard rectifier and transient voltage suppressor (TVS) two-in-one device --- R3T2FPHM3, for automotive applications to provide a new surface-mount solution. Vishay General Semiconductor R3T2FPHM3 using oxide planar chip junction design and common cathode circuit configuration, 3 A, 600 V standard rectifier and 200 W TRANSZORB ® TVS combination in a small FlatPAK 5 x 6 package.
The recently released devices operate at temperatures from -55 °C to +175 °C and are suitable for a variety of high-reliability automotive applications, including secondary protection for sensor units, distributed airbag modules, and low-power DC/DC converters under power dividers. The two-chip solution combines two different technologies in a single package, saving PCB space, simplifying layout, and reducing overall cost for these applications. In series with a standard TVS, the R3T2FPHM3 provides designers with a complete low clamp voltage ratio > 24 V solution.
The two-in-one device's rectifier forward voltage is reduced to 0.86 V, helping to reduce power loss and improve efficiency, and the TVS has a breakdown voltage of 27 V. The R3T2FPHM3's ESD capability is in accordance with the IEC 61000-4-2 standard (air and contact discharge modes); the MSL humidity sensitivity level is rated to Class 1 as specified by J-STD-020, with a maximum peak LF of 260 °C; molded fire rating to UL 94 V-0. Devices are RoHS compliant, halogen free, and AEC-Q101 certified. The R3T2FPHM3 is now available for sampling and mass production with a 12-week lead time.
The LDK220 series of low-dropout linear regulators (LDOs) is a high-performance device designed specifically for low-power consumption and high-precision voltage regulation, widely used in scenarios such as consumer electronics, industrial control, and po
Xilinx Spartan®-7 FPGA Family stands as a defining solution in the mid-range FPGA landscape, blending high performance, energy efficiency, and cost-effectiveness to redefine versatility for industrial, IoT, and consumer electronics applications. Built on
The Altera FLEX series was more than a lineup of FPGAs—it was a blueprint for how programmable logic devices could evolve to meet diverse market needs. The FLEX 8000 laid the architectural groundwork, the FLEX 10K redefined functionality with embedded mem
Among TI standout offerings, the LM4765 and LM4766 are dual-channel amplifiers designed to cater to diverse audio needs—from compact setups to high-fidelity systems. While sharing the same product lineage, these chips differ significantly in power output,
